STRUCTURE ELEMENTS
FLOOR AND TERRACE
The floor panel is made of C24 strength marking pine and spruce wooden beams, with 100-150 mm insulation, which depending on model is made of rock wool or polyester plates. It is possible to change thickness and type of insulation on request.
As a standard for the floor covering parts we use Siberian larch floor boards, which are processed with oils of a natural origin and hard vax. According to customer’s desires, as a floor covering may be installed any other type material, with a main condition that it has sufficient water resistance.
For external terraces we use Siberian larch wooden boards, but on request we also can install wood composite material floor boards or boards of other wood species, as well as external synthetic coverings, carpets and artificial grass.
WALLS
Wall panels are made of C24 strength marking pine and spruce wooden beams, with 100-150 mm rock wool or mineral wool insulation. The structure of wall panel is made according to building standards with the necessary ventilation separating layer and wind, steam barriers.
It is possible to change thickness and type of insulation on request.
The decorative part for inside of walls in standard offer is covered with birch or spruce plywood, but on customer’s request we can cover it also with decorative boards, or to paint decorative, waterproof plates.
For the wall external finishing very often there are used oiled Siberian larch finishing boards, but also this finishing may be replaced with a material from other wood species and different finishing. For the external finishing of walls may be also used non-planed painted wood, burned wood or decorative cement plates.
CEILING AND ROOF
Ceiling panel is made of C24 strength marking pine and spruce wooden beams, with 150 mm rock wool or mineral wool insulation. The ceiling panel structure is made in accordance with building standards with necessary ventilation layer and wind, steam barriers. It is possible to change thickness and type of insulation on request.
Decorative part of ceiling inside in standard offer is covered with Siberian larch finishing boards, birch or spruce plywood, or painted finishing plates.
The roofing depends on model, but mostly it is made of 2 layer bitumen fusible material, which is laid on waterproof OSB plates. The roof metal elements are made of galvanized metal.
_JPG.jpg)
RAILINGS AND STAIRS
Stairs to the second floor terraces in models, where they are provided, are made of wood, while railing systems in standard equipment are made of galvanized metal square tube elements and are combined with natural rope elements, appropriate to marine theme.
When placing the order it is possible to select also railings of other design and materials, also full tempered glass railings with minimal framing.
It is possible to install non-slip metal elements for stair steps on request, or even to produce them completely from galvanized metal.
Railings are installed after the transportation of the watercraft, so there are not increased transport dimensions.
_JPG.jpg)
WINDOWS AND DOORS
In the window structure for all models there is used tempered glass only, and it can be clear or tinted in some shade. In standard equipment there are included single chamber glass panels with 2 tempered glasses and argon gas filling between them. Such window glass panel structure is sufficient to ensure adequate heat persistence and maximally reduced glass exudation, especially in the sauna steam room, which occurs due to high temperature contrast inside and outside.
Depending on watercraft, the window frames in terms of application may be made of different structure and different materials, and this element shall be agreed individually with a customer at the moment of placing the order. It is possible to produce windows and doors with opening sashes or sliding sashes, but, of course, sliding systems are significantly more expensive, but self-evidently they are more convenient in operation.
If the building is not scheduled for a long-term settling, then for opening doors we recommend to use full-glass solutions, where the doors are completely made of glass, without wooden frame, which result in additional feeling of spaciousness and excellent design.
_JPG.jpg)
